NOVA VISTA LEVIATHAN PS-R2 WOODEN STOCK .22

This is the NOVA VISTA Leviathan, hands-down the prominent budget PCP of the #2 pellet calibre. Featuring well-loved and praised accuracy, versatility as a game-shooter / bench-rester (we actually had a customer who achieved 14th position in SA, in the NHSA National Postal Shooting Competition.. He actually competed against gents who shot rifles 3 - 4 times the price of his LEVIATHAN)

This rifle features a hearty, solid beechwood monte carlo stock w/ a raised cheek comb, which certainly adds as much weight, as it does a sense of solidity to the rifle 'feel'. Removing the wooden stock is also considerably easier than removing the two-piece synthetic one. Otherwise, you are still not supplied open sights w/ the rifle, although most people will likely just opt for a scope / optical device to produce an aiming aperture.

This rifle has an overpressure relief valve, likewise fitted w/ a burst disc that will expire before any critical pressure damage can occur to your air reservoirs. We think these are two good safety backstops, necessary as well, for a 300 BAR PCP gun.

Regulator (From 100 BAR ~ 200 BAR of pressure.) - You can only adjust UP when the rifle is filled up. If you try to adjust downward, you'll likely damage the regulator and/or seals attached to it).

Externally adjustable hammer spring - This is accomplished by means of an M3 allen wrench. Rotating the screw head at the back, under the rifle action, inward, increases muzzle velocity. Rotating it the other way, decreases muzzle velocity. Just note that the manufacturer indicates that, possibly after about 500 shots, the hammer spring will break in and you will lose 50 FPS.

Easy accessable bleeder screw - Just chuck an allen wrench in and you can bleed out the entire air reservoir. Comes in handy if you nneed to tune your regulator pressure up or would just like to disassemble your rifle for repairs (maintenance) / modifications / inspection..

Integrated filling probe - Just thread off the end cap on the nose-end of the air reservoir, as shown in the gallery lineup, then you can refill your air rifle. No need to keep a filling probe lying around / losing it. If damaged, you should be able to replace it w/ a standard non-return 1/8" BSP male Q/C fitting.

180cc Air reservoir capacity - On factory power setting, you're looking at about 70 shots per fill, down to 100 BAR, which is really not bad. The second / smaller air reservoir is concealed inside the stock.

Side cocking lever - Nothing beats simplicity of chambering, and the BEHEMOTH offers this. No laggy feel on the lever when hinging it out, no overt stiff feeling as you max out its arc of motion. The rifle has a lengthy vertical bar as well, affixed to the cocking lever, which assists in ease of cocking, even if the lever is seated rearwardly in an otherwise awkward position, with respect to its distance to one's shoulder.

Hybrid Weaver / Dovetail rail - This is a lovely little innovation incorporated into the rifle design, as you can now mount 9-11mm dovetail mount rings OR Weaver mount rings. Picatinny mount rings fit here fine as well, though normally we recommend HAWKE's range of WEAVER mount rails, to hold your scope on top of this rifle.

Overall, This rifle is a top seller specifically because of its adjustable regulator, adjustable hammer spring, online popularity, pricetag and versatility / adaptability. The wooden stock does add a little weight to the rifle and the length can be a source of complaint to some, however, that being so - we do have the BEHEMOTH in stock, which is the younger brother to this rifle - featuring the same rifle action, but just in bullpup configuration, w/ a few extra tactical bells & whistles.

The rifle features a guage on each side of the receiver - The one that has the green markings up to 300 BAR is your fill guage, the one that has green markings up to 200 BAR, would be your regulator guage. Please don't try to push your regulator pressure beyond 200 BAR and also familiarize yourself in full with the instruction manual prior to changing any settings on the rifle.

Technical Specifications;

PCP / Pre-Charged Pneumatic rifle. The rifle fires by means of HPA - High Pressure Air filled up into its air reservoir, to a capacity of 300 BAR. Its fire power comes from letting a regulated amount of air through, which propells your projectile of choice.
Two stage side cocking lever - Full backstroke cocks the gun, reseting the lever guides the pellet probe forward to chamber the round. Please watch out for double-loading your rifle, as this can and will jam / clog your barrel up w/ lead, which might have to be drilled out.
Max velocity: 930 fps (Using 15.89gr JSB, Regulator @ 170 BAR, hammer spring 3 turns)
Shots per Fill: 60 ~ 80, depending on power setting
Max power: 34 fpe / 46 J
Solid beechwood stock - Wood is more easily modifiable for later converting to a bottle, should you so choose. Wood can bbe treated to whatever colour you desire, likewise, blemishes / minor damage can be removed from its surface w/ some finer grit sanding paper.
Externally adjustable regulator (up to 3,000 psi/210 bar) - Please only adjust your regulator down if your air reservoir is empty. Doing otherwise, will likely result in a burst regulator O-ring, consequently, a leaking rifle.
Easily accessible hammer spring adjustment screw
2 stage adjustable trigger
Max fill pressure: 4,351 psi (300 bar)
180cc Air reservoir
Fully shrouded barrel, which muffles down the noise otherwise produced by discharging the rifle
Metal Picatinny rail on fore-end of stock
Textured ambidextrous grip panel on the handle and fore end of the stock, for better handling traction.
There is a loophole on the rear end of the metal Picatinny rail under the stock, along w/ a factory-fitted sling stud to the rear end of the stock, where-through sling swivels can be fitted. We recommend a sling w/ these pre-fitted.
Dual gauges - Regulator pressure (RH Side) and air reservoir pressure (LH Side)
Male Q/C fitting affixed to the front end of the air reservoir, concealed by a flush-fitting screw cap
Easy access degassing screw under the stock, corresponds w/ M3 hex drive3
Manual pendelum type safety on the right face of the rifle - flips forward and rearward w/ little difficulty
Two-part 9-11mm Dovetail / Weaver rail hybrid on top of the receiver, split by the breech. This would be for mounting an optical sighting / target acquisition device of your choosing, as this rifle is not fitted w/ open sights from the factory.
Magazine: 10 round, .22 cal self-indexing type. Features a rotating vinyl face for winding the aluminium magazine core, all of which are enclosed by a polymer body.
Barrel length: 22.75"
Overall length: 42.75"
Includes one multishot (10 round) magazine and a single shot tray