Accessories

store_mall_directory TACTICA

HDR/HDP/HDS/HDX BUMP CAP TORQUING TOOL Disc shaped tool, measuring ø72mm x 9.1mm. Our newer iteration is 85% solid for added, longer-lasting strength, although that might be slightly over-engineered for this purpose. Nonetheless, thanks to the rounded teeth along the outermost circumference, this...

store_mall_directory Unbranded

Part that is used to adapt the rail on the receiver (the milled-out dovetail), to Picatinny, which might be useful for many more tactical types of smaller red dot sights and optics that otherwise ship only with Picatinny mounting brackets. Specifications Top Rail Full Length: 125mm Dove...

store_mall_directory TACTICA

Zoom ring throw lever specifically designed w/ the HAWKE FAST MOUNT 3-9x40 AO's measurements, however, should fit most HAWKE scopes w/ a zoom ring featuring an outisde � of 41mm, which also has the slabbed protrusion on the ring, which this clamp set primarily affixes onto as its rotational manip...

store_mall_directory TACTICA

a Useful caddy for retaining your PCP handpump's hose in vertical position, parallel to your pump's mainshaft. This is useful for keeping in check an otherwise elongated part of the pump that is not ordinairily removed, hence that it needs to operate leak-proof at pressures of up to 300 BAR. For ...

store_mall_directory UNBRANDED

This is a bonded seal, a metal washer with a vulcanized rubber insert for use in high-pressure applications where other means of sealing are unsuitable. The flexing action of the lips under pressure provides a positive and leak-proof seal against a wide range of fluids and gasses.

store_mall_directory TACTICA

Rifle stock band that will fit over the� FX Streamline's stock as well as the reservoir with it, thereafter, capturing the barrel itself. Under the stock, there is a weaver rail for mounting for either a bipod (suggested) or an optic such as a flashlight or a laser kit. This weaver rail itself on...

store_mall_directory TACTICA

Captured barrel band for the FX Dreamline, caliber irrelevant. This will bind the barrel to the reservoir, countering any barrel wobble, once the two screws are sufficiently tightened at the top and the bottom. No two rifles, not even off of the same production line, shoot exactly the same. There...

store_mall_directory TACTICA

Single pellet tray loader for the DAYSTATE rifles, in .22 May yield slight difficulty w/ .218 H&N slugs, however, this pellet loader works 100% Will work for the following DAYSTATE models; Huntsman� Merlyn� Mk3� Mk4 Target� Mk4 Airwolf� Mk4 Panther Air Ranger� Griffen� Wolve...

store_mall_directory TACTICA

Reservoir weaver/accessory rail for the ARTEMIS PP800 PCP pistol. This part clamps onto the bottom side of the reservoir, to allow for the clamping of a laser or flashlight. Could also be useful if you have a weaver-mounted magazine holder bracket. Retention is only by means of slipping-on / tens...

store_mall_directory TACTICA

Pellet magazine for the Weirauch HW100 PCP rifle in .22 Works perfectly w/ stated rifle, manufactured mostly (50%>) solid and has a dense hardness to it. High durability. It Will work exactly like the original, except that, this one is manufactured from plastic and costs a fraction of what the...

store_mall_directory TACTICA

Pellet magazine for the Weirauch HW100 PCP rifle in .177 Works perfectly w/ stated rifle, manufactured mostly (50%>) solid and has a dense hardness to it. High durability. It Will work exactly like the original, except that, this one is manufactured from plastic and costs a fraction of what th...

store_mall_directory TACTICA

Barrel band for the HATSAN AT 44-10. Fits .177, .22, .25 Barrel hole is��13mm Reservoir hole is��31mm Spaced apart 4mm. No fasteners needed. 1mm wall on top, 2mm wall on the sides, adjacent to the reservoir and 3mm wall at the bottom. The reservoir is otherwise featureless, but Picatinny rails an...

store_mall_directory TACASSIST

Grip pads w/ 120 grit, aluminium oxide, used to stock onto a pistol grip, contour of a rifle. Ideal for older, unergonomic pistols made entirely of steel. Can easily be laser cut w/ patterns, shapes, and cut-out shapes to add some pleasant aesthetic. Strong adhesion, removable as well. Just peel ...

store_mall_directory UNBRANDED

Brass-manufactured filling probe for the KRAL (BREAKER) PUNCHER series of PCP rifles.  Comes supplied w/ a set of yellow o-rings installed, as illustrated. The threading visible is 1/8" BSP and is compatible w/ most PCP female threaded parts on the market. The best method to use a probe like this...

store_mall_directory ZTECH

Locally 3-D laser printed pellet tray, brought to you by our very own house brand, ZTECH.Plastic composition, trial and error process to manufacture the dimensions and tolerances just right.Product not officially licensed or endorsed in any way by the manufacturer.Guaranteed compatibility with st...