Basic gun-profile holster to fit a certain size group of railing, unless the size descriptor indicates a gun model - then it would be profile-moulded to specifically fit the frame of the indicated gun
Has thumb-break retention - a 25mm webbing strap that runs up from the outside, which fastens onto a rigid strap on the inside, coupling by means of a branded, nickel-platted studding. This combination is adjustable to accommodate different lengths of rail, via a plastic three-bar slider that sits on the outside, just above the metal IWB clip
The metal clip fits over the waist band of the trouser. On the inside is a single 50mm webbing band which the belt can run through for OWB carry, although we recommend a 50mm belt in conjunction with this option, otherwise the holster will not be mounted stable and may wobble whilst moving at higher than walking speeds .
The trim finish on the holster is 25mm webbing split equally along the edge and sewn onto. Renders a professional finish.
Holster is open underneath for improved ventilation to counteract perspiration from forming on or inside gun.

Second-to-basic holster, made to fit specific gun (family) frame(s) unless not indicated as medium or large, then would loosely fit two different frame size categories.
The holster has a clip on the outside for mounting IWB, which will hold the gun, but not perfectly in place, as holster might shift back and forward. There is a rubber pad that it holds against, horizontally serrated to improve grip against the inside of the waistband to resist moving around as much as possible.
Suitable for concealed carry, however, not for serious EDC'ers.
Open mouth to receive pistol but without any retention.
The edge is lined w/ 25mm webbing, split and folded over the border, sewn for a professional finish.
Overall quality sewing, done straight and center
Nylon, black

Second-to-basic holster, made to fit specific gun (family) frame(s) unless not indicated as medium or large, then would loosely fit two different frame size categories.
The holster has a clip on the outside for mounting IWB, which will hold the gun, but not perfectly in place, as holster might shift back and forward. There is a rubber pad that it holds against, horizontally serrated to improve grip against the inside of the waistband to resist moving around as much as possible.
Suitable for concealed carry, however, not for serious EDC'ers.
Open mouth to receive pistol but without any retention.
The edge is lined w/ 25mm webbing, split and folded over the border, sewn for a professional finish.
Overall quality sewing, done straight and center
Nylon, black

Basic gun-profile holster to fit a certain size group of railing, unless the size descriptor indicates a gun model - then it would be profile-moulded to specifically fit the frame of the indicated gun.
Has thumb-break retention - a 25mm webbing strap that runs up from the outside, which fastens onto a rigid strap on the inside, coupling by means of a branded, nickel-platted studding. This combination is adjustable to accommodate different lengths of rail, via a plastic three-bar slider that sits on the outside, just above the metal IWB clip.
The metal clip fits over the waist band of the trouser. It sits jawed upon a serrated rubber pad which hugs the inside of the trouser, to provide friction and resist movement / swaying. On the inside is a single 50mm webbing band which the belt can run through for OWB carry, although we recommend a 50mm belt in conjunction with this option, otherwise the holster will not be mounted stable and may wobble whilst moving at higher than walking speeds.
The trim finish on the holster is 25mm webbing split equally along the edge and sewn onto. Renders a professional finish.
Holster is open underneath for improved ventilation to counteract perspiration from forming on or inside gun.

This Holster Fits The following Gun
That Is Available On Our Site It fits the Action man Rollie and Dan Wesson CO2 Gas Guns.

Second-to-basic holster, made to fit specific gun (family) frame(s) unless not indicated as medium or large, then would loosely fit two different frame size categories.
The holster has a clip on the outside for mounting IWB, which will hold the gun, but not perfectly in place, as holster might shift back and forward. There is a rubber pad that it holds against, horizontally serrated to improve grip against the inside of the waistband to resist moving around as much as possible.
Suitable for concealed carry, however, not for serious EDC'ers.
Open mouth to receive pistol but without any retention.
The edge is lined w/ 25mm webbing, split and folded over the border, sewn for a professional finish.
Overall quality sewing, done straight and center
Nylon, black