feature

◆ Comply with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab standards

◆ International POE general standard IEEE 802.3af/at, support full port standard detection function

◆ Supports POE powered devices such as wireless access points (APs) and network surveillance cameras through Category 5/6 Ethernet cables

◆ Flow control mode: full-duplex adopts IEEE 802.3x standard, half-duplex adopts Back pressure standard

◆ Support port auto flip (Auto MDI/MDIX)

◆ Single port POE power 30W

◆ Switching system using store-and-forward

◆ All ports support wire-speed switching and support jumbo frame transmission

◆ Zero configuration feature, automatically supplied to adaptive devices

◆ Panel indicator monitoring status and help failure analysis

ST4000VX007 4TB 64MB Cache 3.5" Surveillance Internal Hard Drive

This 9 ways power supply panel is specially designed for CCTV scurity system installers. Power supply panels for up to 9 cameras offer a more professional alternative to individual power adapters, , allowing you to consolidate Camera Power in a central location. The most special feature is that each outlet is individually fused protected, with LED indicators. Additionally, this is a 12V DC 9 cameras panel, 9 ports power supply comes with a locker & keys.

• Custom-built for surveillance applications with Image Perfect firmware for crisp, clear, 24×7 video workloads

This is a metal cabinet CCTV power supply distribution box is designed to be used with CCTV cameras.
The power supply support of AC inputs varies from 100Vac to 220Vac
It can supply a maximum DC output of 12V, 15Amp on each port of terminals.
The power supply box has short circuit, over current, over temperature and over voltage protection
Metal cabinet power supply

- Form Factor: 3.5 inch
- Perfect for: SMB surveillance DVR and NVR
- Capacity:1TB
- No. of Cameras Supported: 1 to 64
- Workload Rating: 180 TB/year
- No. of Drive Bays Supported: up to 8
- Built to record 90% of the time
- NVR ready drives deliver robust drive design for multi-drive environments

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution.

Input Connection: 1 x 2.1mm Female jack socket. Output Connection: 4 x 2.1mm Male jack plugs. Voltage Rating: 12-36 Volts AC or DC. Current Rating: 1A - 2A - 5A and 10A Power supplies.

Built to record 90% of the time — supports up to 64 cameras

Up to 2TB or 2,000 hours of HD video

2 TB/year workload rating, 3× the workload of a desktop drive and backed by a 3-year limited warranty

NVR ready drives deliver robust drive design for multi-drive environments

Protect your data against the unexpected with an optional +Rescue Data Recovery Service plan