Secure Shopping
Shopping cart
Search
Bipods
Our Bipods
We stock a small variety of bipods, mostly branded UTG (also known as "Leapers UTG"). Their products all come supplied w/ swivel mounting adaptors (lined with an anti-scratch rubber layer inside for extra grip), making them useful for mounting onto rifle stocks. Those that come supplied with the offset swivel plate accessory, may be compatible with our range of air rifles. In such a case, the stock should preferably be wood and should have an existing swivel stud affixed. Before deciding on buying a bipod in conjunction with an airgun or to be used in conjunction, make sure the airgun has a weaver or picatinny railing. If not, make sure there is a swivel stud in place. If not, you might need to buy one separately and install it or have it installed. We however, cannot assume any responsibility for such work done on any products bought from us.
We have bipods sitting straight underbarrel as well as offset (to not obstruct one's off-hand). Some have mounting blocks that screw on with the hand and can also be tool-fastened thereafter (w/ a flat screwdriver), while others have a QD lever lock option. Some have legs w/ external springs that sets only in two positions, while others set the same way, but uses a 'posi-lock' spring-loaded mechanism for leg retention. Our premium models come w/ legs that locks in five positions - 180, 45 and 90 degrees.
Most of the bipods are capable of panning, while some can pan 360 as well as tilt up/down and sideways to get a sight picture beyond cover/concealment without needing to lift the gun up.
Most bipods can adjust their center height whilst the majority have legs that can adjust to allow firing over a slope or small cover.
The majority of these bipods are Anodized Aluminium, meaning they have superb corrosion resistance, even should the finish come off, but they are not steel and whilst they are made durable under fair use conditions, they will likely not survive for long if sustaining prolonged battering.
As with any mating metal parts, keep your bipod maintained with proper lubricant, such as BALLISTOL (which we also sell) and it will serve you many happy years ahead
All LEAPERS UTG products come fitted with conical rubber feet, also known as 'ferrules' sometimes, w/ concentric grip patterns to allow them easier grip on uneven spots.
UTG SHOOTER'S BIPOD SHORT TL-BP28SQ
R 863.00
Anodized Aluminium, black dyed, matte
Longer (20%), new-spec mounting deck, fastened w/ QD locking lever
Pan enabled
No spring, legs lock positively in place either forward 180 or upright degrees w/ spring-loaded bolt
Extendable (male) legs, secured by non-slip twist-lock collar
Centre height adjustable 157.5 - 170 mm, extendable 170 - 195.5mm legs
Pointed rubber ferrules w/ concentric circles for uneven surface standing.
Comes supplied w/ swivel mounting plate for attaching to wooden stock.
UTG BIPOD LONG TL-BP88
R 768.00
Anodized Aluminium, black dyed
Quick detach (QD) fully adjustable lever, for speedy attachment or detachment onto Picatinny or weaver railing. Leapers UTG patent.
360 Panning
Externally spring-loaded legs; can lock up forward
Lockable thumb wheels w/ 7 extention notches. bipod stands at 203mm, adjustable to 315mm
Flat, conical dense rubber ferrules for grip. Horizontally line textured.
Weighs 362.8g
Swivel stud conversion option included, for use w/ unrailed rifle stocks
UNBRANDED BIPOD 8.8
R 400.00
Rifle bipods attach to a rifle either by attaching to the barrel or to a sling swivel mount. These can be folded down for quick stability when shooting or folded up close to the barrel during transportation and when not in use. Rifle bipods help hunters and other shooters to achieve improved accuracy by providing a stable rest in a variety of situations. Rifle bipods are often adjustable making them ideal for multiple shooting positions.
UTG BIPOD LONG TL-BP03
R 1 480.00
Full metal construction, w/ squared cross bolt for fitting onto Picatinny (M1913) railing. The rail mounting is offset, allowing for horizontal gripping on rifle without obstructing the arm
Rotates 360°, staying fixed on horizontal surface whilst shooter can follow a sight picture, without needing to lift the bipod up or move hands from the gun.
The bipod can tilt backward and forward
Can lock positively into 5 different positions, ranging between horizontal and vertical levels
Has five extendable lengths, locks by means of a thumb wheel
Has a center height of 206 - 304 mm
UTG RECON BIPOD SHORT TL-BP02
R 2 130.00
Anodized Aluminium construction, dyed black. Mounting deck fitting onto railing is steel
Bipod proper fixes onto picatinny railing by means of cross bar rail catch, fixes w/ single knurled screw. Can affix to rail-less stocks by using supplied screw-in adapter plate
Pans full circle, allows for rifle to be tilted up and down to maintain sight picture without needing to lift the gun and re-position it. Basically allows for multi-axial movement. Has two sensitivity-adjustment screws(flat head) to prohibit extraneous movement or allow for more movement when, for example, firing at a closer moving target
Offset picatinny mounting, to keep bipod in least obtrusive position when not in use.
Tilts left and right to clear cover
Legs Adjusts between 5 positive-locking positions; Locks in at 180, 45 or 90 degrees
Lower legs (male) has seven deep cut flutings, for height adjustment and to maintain hold in position. Adjustable by spring-loaded button tab
Rubberized Foot Pads, conical shaped w/ horizontal concentric grip patterns
Comes supplied w/ with swivel stud for mounting onto wooden stock
Center Height Adjustable From 142 - 178 mm
HATSAN BIPOD
R 169.00
Black, Hard plastic
Spring-loaded, leg locks can lock in place
Flat ferrules resists sliding or movement.
Fits all Hatsan air guns. Might fit other makes and models. Phone in for further inquiry
HAWKE TABLE TOP TRIPOD ADJUSTABLE 64102
R 565.00
The Adjustable Table Top Tripod from Hawke Optics is adjustable table-top support designed for sports optics like spotting scopes and binoculars. Varying between a maximum height of 11.4" and a minimum height of 9.6", the tripod is ideal for use on a table or when lying prone. The tripod folds to just 13.7" for easy transport and weighs just 1.5 lb due to its light, aluminum construction. The tripod features a basic adjustable tilt head for simple vertical and horizontal movements. The head is equipped with a standard 1/4"-20 mounting thread for compatibility with most scopes, binoculars, and adapters.
UTG RECON BIPOD TL-BP78
R 819.00
Anodized Aluminum, black dyed w/ steel cross mount
Bipod proper fixes onto picatinny railing by means of cross bar rail catch, fixes w/ single knurled screw. Hand fastened, but can be tightened w/ flat head screwdriver
Can affix to rail-less stocks by using supplied screw-in adapter plate
Full circle panning
Legs are externally spring-loaded, locks into forward 180 and 90 degrees only
Legs (male) can elongate and is kept in position by tension wheel on each leg
Centre height adjustable from 155 mm to 200.5 mm
HAWKE BIPOD 6-9'' FIXED
R 1 329.00
UTG RECON BIPOD TL-BP98Q TACTICAL
R 1 129.00
Manufacturer claims 'heavy duty metal construction', non-magnetic.
Mounting piece comes w/ QD locking lever, not turning screw, for snappy attachment/detachment
Double horizontal bars at top and back of bipod, for structural support
Panning enabled
External spring loaded, legs lock into forward 180 and upright 90 degrees only
Lower legs (male) have 5 extension notches, caught by spring catch, toggled by spring-loaded tab. Further secured by knurled fastening wheel (per leg)
Dense rubber feet w/ conical bottom. Concentric horizontal line grip patterns
Supplied w/ 2.5mm hex key and swivel stud adapter
- 1
- 2