TACTICA Bi-partite (dually partitioned) pellet tin. The threading on the V1 pellet tin is M99x1.75 w/ 4 turns and the lid threads slightly more trickier, but it does work just fine. The V2 we've updated to a thread pitch of 2.50mm w/ 2 turns and it works really wonderful.
The walls (the rounded boundary and the partition) are 2.5mm wide and in its entirety, we make this pellet tin 8.5% solid, to really provide a rock-hard product, but w/out making it excessively weighty.
In terms of capacity - Each partition has a capacity of 250 / .22 pellets, whereafter, the lid can thread on fine.
The edges are rounded off / filleted 1mm along the outermost boundary on the lid and tin base to ensure comfortable handling of the tin.
The tin is ideal for our shooters who have more or less ascertained which combination of two pellet or slug types their rifles prefer and so, instead of taking two tins to the range, they can take one 500/.22 sized one, w/out worrying that the lid will slip off, which the JSB 500/.22 tins used to be infamous for.
The V1 has been discontinued and only the V2 will henceforth be on the production run. poly-partitioning also avilable on request, moreover, if you spend R1000 or more on your order, we can customize your pellet tin complimentary, please see the pictures attached.
Inside ø: 95mm
Partition width: 3.5mm
Pellet tin interior height: 24mm
Density: 85% Solid
Lid Face ø: 106mm
Lid height: 9mm
Height when assembled: 26mm
Do not expose to temperatures over 60°C, treat this pellet tin as you would any plastic product. Whilst it will easily bear its load in lead to capacity, it will not survive impact related damage / negligent handling for much longer than the metal tin would. This tin will never dent, however, it may crack. Please note the horizontally running grainline.