Drop-in replacement for the standard barrel-mounted MR-series detants. These slip-in under the forward O-ring fitted around the fore-end of the barrel circumference - just be sure to use a burr-free smooth pointy tool to lift the O-ring up when installing this detant and make sure that it is positioned correctly (w/ the acute pointed end facing toward the interior of the barrel, w/ the angled end facing towards the receiver.)
The catch-end on this detant is longer and will more thoroughly guaranteee that your shot does not roll freely out the barrel. It is also made from a flexible rubber material, so the tip won't get snapped off after some use - just be sure to apply some silicone lubricant to help keep it in supple / flexible condition. Like most flexible compounds, if it dries out, it will become brittle and will disintegrate suddenly or fragment with time.
We recommend the following for lubricating and keeping these detants supple;
- NUPROL SILICONE OIL AEROSOL W/ SPOUT - 110ML
(This is specific to O-rings and to maintain them, but will also work just fine for detants. Though, if you need something that is a bit more broadly applicable, then we recommend; - BALLISTOL UNIVERSAL OIL SPRAY 21723 - 200ML
(This is a clean-all, lubricate-all, renew-all product that magically restores just about anything you apply it to. You can use it to swab out carbon fouling, renew metal, remove rust, rejuvenate leather, lubricate O-rings, etc. It goes w/out saying that you can use it on paintball marker detants as well.)
Techinical Specifications;
Dimensions; |
|
Width |
2,83mm |
Length |
19,20mm |
Width |
2,30mm |
Length of ball-stopper |
2,85mm |
Width of retainer groove |
3,75mm |
Depth of retainer groove |
1,45mm |
Drop-in replacement for the standard barrel-mounted MR-series detants. These slip-in under the forward O-ring fitted around the fore-end of the barrel circumference - just be sure to use a burr-free smooth pointy tool to lift the O-ring up when installing this detant and make sure that it is positioned correctly (w/ the acute pointed end facing toward the interior of the barrel, w/ the angled end facing towards the receiver.)
The catch-end on this detant is longer and will more thoroughly guaranteee that your shot does not roll freely out the barrel. It is also made from a flexible rubber material, so the tip won't get snapped off after some use - just be sure to apply some silicone lubricant to help keep it in supple / flexible condition. Like most flexible compounds, if it dries out, it will become brittle and will disintegrate suddenly or fragment with time.
We recommend the following for lubricating and keeping these detants supple;
- NUPROL SILICONE OIL AEROSOL W/ SPOUT - 110ML
(This is specific to O-rings and to maintain them, but will also work just fine for detants. Though, if you need something that is a bit more broadly applicable, then we recommend; - BALLISTOL UNIVERSAL OIL SPRAY 21723 - 200ML
(This is a clean-all, lubricate-all, renew-all product that magically restores just about anything you apply it to. You can use it to swab out carbon fouling, renew metal, remove rust, rejuvenate leather, lubricate O-rings, etc. It goes w/out saying that you can use it on paintball marker detants as well.)
Techinical Specifications;
Dimensions; |
|
Width |
2,83mm |
Length |
19,20mm |
Width |
2,30mm |
Length of ball-stopper |
2,85mm |
Width of retainer groove |
3,75mm |
Depth of retainer groove |
1,45mm |
Share and get 15% off!
Simply share this product on one of the following social networks and you will unlock 15% off!