In this combo you will receive the following :
1 X Sur Arms Ansar BRT Blank Gun
10 X Kaiser Blank Rounds
This is the SUR ARMS ANSAR BRT model - a GLOCK 20 Gen 4 replica that does sit rather beefy in the hands, a little on the weighted end as well - typical of larger calibre pistols whose design is built around the calibre.
Key Features;
- Beefy and weighted
- 16+1 Shot capacity
- Super authentic look-alike
- Pseudo striker fired
- All metal double blade trigger safety (Imitation 'GLOCK SAFE ACTION' trigger)
- Polymer frame w/ a single underbarrel Picatinny rail slot
Despite the heft / bulk that this pistol packs, this pistol does have a striking amount of realistic features to it, that makes it a tad closer to a GLOCK firearm, compared to the RETAY G19C, for example. The pistol has no GLOCK licensing marks of any kind on it.
The frame features raised / deboss block checkering in a downwardly pattern. The backstrap is sloped like that on a GLOCK, allowing for an especially positive grip to the base of the handle, where most of the handling strength on the pistol lies. This, when firmly clenched, usually acts to support the upper of the hand, which counteracts the muzzle from climbing too much when discharging a firearm.
The finger rests on the upper of the handle work well to support both one's thumb and index finger.
Otherwise, the pistol grip features finger grooves as per the previous generations, gapped w/ centrifugal rows of horizontal stippling. These do feature sharp angles that clinches to one's finger, counteracting slippage / unintentional adjustment of one's grip around the front of the handle. The slide catch is all-metal and doesn't look super realistic, but works well. It has a square-ish look to it, but w/ a smooth texture.
The rear of the slide implies that the pistol would be striker fired, however, the pistol is in fact pseudo-striker fired, meaning it features an internal hammer that discharges the gun.
The field strip notches works similar to that found on the EKOL GEDIZ, in that, they have to be pushed down and held down, in order to hitch the slide off the rear of the frame. This pistol however, does require a bit of winging and effort to hitch it off the rear.
The sights are a little raised, which is nice and can be nice and intuitive to use.
Our overall impression of this pistol is positive and despite the beef this pistol carries, it certainly has a very robust feel to it. Like most of the blank guns by SUR ARMS - they may need a little break-in time before they will reliably cycle - just dry-cycle the pistol a number of times
Technical Specifications;
|
Replica of |
GLOCK 17 Gen 4 (Cosmetically) |
|
Calibre |
9x22mm P.A.K |
| Venting | Front |
| Pepper cartridge compatible? | Yes |
|
Dimensions (mm) |
|
| Weight (grams) | 978 |
|
Trigger Action |
Single Action Only, Semi Auto. |
|
Firing method |
Internally hammer fired |
|
Magazine capacity |
16+1 |
|
Composition |
Polymer frame, metal slide |
|
Safety |
None - only features a double blade trigger safety, basically a double set of triggers, both of which need to be engaged, in order for the gun to be fired. These of course, are all-metal |
|
Ease of Field Strip |
4/10 - a Bit on the more difficult side here, we won't lie. The field strip tabs are really stiff, likely attributed to the spring tension they are under. To hitch the slide off, whilst holding these engaged, will take some practice to reliably accomplish, but can be had. It could be a good thing if you tend to borrow your stuff out, as the friend won't be able to strip your gun accidentally or otherwise. |
|
Lanyard loophole |
None |
|
Removable gripstocks |
No. The texturing of the handle is fixed and cannot be toggled, only permanently modified. It can only be toggled by swopping out the entirety of the frame, or by attaching something like a PACHMAYR slip-on grip. |
|
Magazine Release |
Traditional |
|
Underbarrel Picatinny Rail |
Yes, one forward slot available only, like you'd have on a GLOCK firearm |
Here's a nice shooting demonstration video of this pistol :
In this combo you will receive the following :
1 X Sur Arms Ansar BRT Blank Gun
10 X Kaiser Blank Rounds
This is the SUR ARMS ANSAR BRT model - a GLOCK 20 Gen 4 replica that does sit rather beefy in the hands, a little on the weighted end as well - typical of larger calibre pistols whose design is built around the calibre.
Key Features;
- Beefy and weighted
- 16+1 Shot capacity
- Super authentic look-alike
- Pseudo striker fired
- All metal double blade trigger safety (Imitation 'GLOCK SAFE ACTION' trigger)
- Polymer frame w/ a single underbarrel Picatinny rail slot
Despite the heft / bulk that this pistol packs, this pistol does have a striking amount of realistic features to it, that makes it a tad closer to a GLOCK firearm, compared to the RETAY G19C, for example. The pistol has no GLOCK licensing marks of any kind on it.
The frame features raised / deboss block checkering in a downwardly pattern. The backstrap is sloped like that on a GLOCK, allowing for an especially positive grip to the base of the handle, where most of the handling strength on the pistol lies. This, when firmly clenched, usually acts to support the upper of the hand, which counteracts the muzzle from climbing too much when discharging a firearm.
The finger rests on the upper of the handle work well to support both one's thumb and index finger.
Otherwise, the pistol grip features finger grooves as per the previous generations, gapped w/ centrifugal rows of horizontal stippling. These do feature sharp angles that clinches to one's finger, counteracting slippage / unintentional adjustment of one's grip around the front of the handle. The slide catch is all-metal and doesn't look super realistic, but works well. It has a square-ish look to it, but w/ a smooth texture.
The rear of the slide implies that the pistol would be striker fired, however, the pistol is in fact pseudo-striker fired, meaning it features an internal hammer that discharges the gun.
The field strip notches works similar to that found on the EKOL GEDIZ, in that, they have to be pushed down and held down, in order to hitch the slide off the rear of the frame. This pistol however, does require a bit of winging and effort to hitch it off the rear.
The sights are a little raised, which is nice and can be nice and intuitive to use.
Our overall impression of this pistol is positive and despite the beef this pistol carries, it certainly has a very robust feel to it. Like most of the blank guns by SUR ARMS - they may need a little break-in time before they will reliably cycle - just dry-cycle the pistol a number of times
Technical Specifications;
|
Replica of |
GLOCK 17 Gen 4 (Cosmetically) |
|
Calibre |
9x22mm P.A.K |
| Venting | Front |
| Pepper cartridge compatible? | Yes |
|
Dimensions (mm) |
|
| Weight (grams) | 978 |
|
Trigger Action |
Single Action Only, Semi Auto. |
|
Firing method |
Internally hammer fired |
|
Magazine capacity |
16+1 |
|
Composition |
Polymer frame, metal slide |
|
Safety |
None - only features a double blade trigger safety, basically a double set of triggers, both of which need to be engaged, in order for the gun to be fired. These of course, are all-metal |
|
Ease of Field Strip |
4/10 - a Bit on the more difficult side here, we won't lie. The field strip tabs are really stiff, likely attributed to the spring tension they are under. To hitch the slide off, whilst holding these engaged, will take some practice to reliably accomplish, but can be had. It could be a good thing if you tend to borrow your stuff out, as the friend won't be able to strip your gun accidentally or otherwise. |
|
Lanyard loophole |
None |
|
Removable gripstocks |
No. The texturing of the handle is fixed and cannot be toggled, only permanently modified. It can only be toggled by swopping out the entirety of the frame, or by attaching something like a PACHMAYR slip-on grip. |
|
Magazine Release |
Traditional |
|
Underbarrel Picatinny Rail |
Yes, one forward slot available only, like you'd have on a GLOCK firearm |
Here's a nice shooting demonstration video of this pistol :
Recommended for you
Recently viewed
We specialise in Airguns, Self Defense and Shooting Hobbies. We also stock Home Security & Automation products. We carry physical stock of the products we advertise, and strive to provide you with the best possible service and price!
- R99 courier fee on all orders & FREE delivery on orders over R2000
- We are a reputable retailer with a physical store that you can trust
- Found it cheaper elsewhere? Let us know & we will try to match/beat it
Share and get 15% off!
Simply share this product on one of the following social networks and you will unlock 15% off!